ElecronivsV3 Development Board
- Home
- Semiconductor Hardware Kits
- Semiconductor Hardware Boards
- Development Boards
- ElecronivsV3 Development Board
What is Elecronics3
![](https://gettobyte.com/wp-content/uploads/2024/04/NXP_logo-300x120.png)
![](https://gettobyte.com/wp-content/uploads/2024/04/automotive_logo__2_-removebg-preview.png)
![](https://gettobyte.com/wp-content/uploads/2024/04/Captureautosar.jpg)
Short Intro on ElecronicsV3
ElecronicsV3 is a versatile development board based on the NXP Semiconductor S32K144 MCU, designed for automotive enthusiasts and tech hobbyists. This board is equipped with a rich set of onboard features and interfaces for various Automotive DIY projects.
ElecronicsV3 has on board JLink Debugger for hassle free debugging the ARM Cortex M4 based Automotive Microcontroller S32K144. The Board also has On-board Bosch IMU sensor BNO055 for building telematics based automotive application. In complement to IMU sensor, board also has on-board CAN Transceiver IC for doing CAN Communication to build automotive projects effortlessly.
To use ElecronicsV3
Autosar MCAL Layer Support
On-Board IMU Sensor BNO55
Matlab Model Based Designing Tool
On Board CAN2.0B Channel
Eclipse IDE Based Programming
On-Board Jlink Debugger
Resources to Get started
Videos to explore for ElecronicsV3 Board
Technical Hardware
Features of ElecronicsV3
S32K144 MCU in LFQP100 pin package
ElecronicsV3 is built on NXP Semiconductors Automotive Microcontroller S32K144.
Reset and Power Conffiguration
Slider for: Power Configuratio via UART Type C cable or Debugger Connector and Reset Configuration via Onboard reset button or Jlink Debugger
Detail Silk Screen
No Need to refer docs again and again, all Pins information and Labelling on the board.
Onboard RGB LED and 2 switches
RGB LED at PD15, PD16 and PD0 along with 2 tactile switches at PC12 and PC13
On-Board CAN transceiver IC TJA1051 via green screw Terminals
CAN2.0B complaint at CAN0 using PE5 and PE4 as CAN Tx-Rx pins, with CAN terminal Enable header
OnBoard IMU Sensor BMO055
1 Variable Potentiometer
Potentiometer at PC14 for playing ADC of S32K144 MCU
Onboard JLink Debugger
Plug and Play for Development
Breadboard Compatible Design, which exposes all of the pins of the Microcontroller and easily cpnnects external sensor/module's.
![](https://gettobyte.com/wp-content/uploads/2024/07/IMG_20240701_115836355_HDR-1024x562.jpg)
ElecronicsV3
- Readily available
- Cost Effective and easy to use
- >>INR 12K/piece
![](https://gettobyte.com/wp-content/uploads/2024/07/IMG_20240701_115836355_HDR-1024x562.jpg)
ElecronicsV3 with Automotive Autosar MCAL layer Course
- Autosar MCAL layer understanding
- Use of MCU peripherals via MCAL layer RTD
ElecronicsV3 Pinout
![](https://gettobyte.com/wp-content/uploads/2024/04/ElecronicsV2_S32K144_IC.png)
Usecases of ElecronicsV3
Perfect Embedded Hardware Board for
Freshers and working professionals.
Learn Embedded Basics
Learn Basics of Microcontroller world using Industrial tools and framework like: Eclipse Based IDE, Jlink Debuggers, Microcontroller Software Packages (RTD, HAL) and Datasheet.
Learn Autosar Stack
Wanna learn and build skill sets for Autosaur Technology. ElecronicsV2 has support of Autosaur MCAL layer integrated with eclipse-based IDE..
Learn Device Driver Development
Learn how to use Microcontroller Peripherals like: GPIO, UART, I2C, SPI, Timers, Interrupts, DMA and etc with industrial Microcontroller Software Packages and stacks.
Learn Automotive Peripherals
Learn automotive peripherals like: CAN, LIN, FlexTimers, Hardware Security Modules on Industrial Microcontroller in cost effective ways.
Build Automotive projects.
Build Automotive projects in DIY form using Automotive sensors and frameworks.
Perfect Embedded Hardware Kit for
Automotive Startups/Corporates
Build automotive Proof of Conecpt
Struggling to find right kind of Embedded Hardware kits to build the proof of concept of your automotive products. Our Embedded Hardware Kits Would be helping partner for that.
Prototype/Reasearch based on Automotive chips
Building Automotive products require use of Semiconductor chips like that of NXP, Renesas, TI or Infineon. Explore Our Embedded Hardware kits which are based on Such Microcontroller Chips
Plug and Play system
Building/Developing Automotive Products, often require use of Hardware Kits which are easy to use and can be easily programmed with custom application, in addition to that based on Industrial Microcontrollers. Our Embedded Hardware Kits is solution to all listed needs.
To use ElecronicsV3
NXP Semiconductors provide Embedded Software tools and gettobyte provides Embedded Hardware Tools to start your journey on S32K1 series of Microcontroller. From Integrated Development Environment (IDE) to Microcontroller Software packages for S32K1xx series of Microcontroller. As ElecronicsV2 is built on S32K144 Microcontroller, which belongs to S32K1xx series. So toolchains will be same for using ElecronicsV2 boards.
To use ElecronicsV3
Read About Our latest Kits
Our Reach
across India
![Ancit Technologies](https://engitech.s3.amazonaws.com/images/testi1.png)
Ancit Technologies
Automotive Consulting Company![Skill Lync](https://engitech.s3.amazonaws.com/images/testi2.png)
Skill Lync
E-Learning Providers![Decible Labs](https://engitech.s3.amazonaws.com/images/testi2.png)
Decible Labs
E-Learning providers![Capuf Embedded](https://gettobyte.com/wp-content/plugins/elementor/assets/images/placeholder.png)
Capuf Embedded
Computer and Electronics Manufacturing![Dr Shree Prasad](https://gettobyte.com/wp-content/plugins/elementor/assets/images/placeholder.png)