Single Blog

What is Elecronics3

Short Intro on ElecronicsV3

ElecronicsV3 is a versatile development board based on the NXP Semiconductor S32K144 MCU, designed for automotive enthusiasts and tech hobbyists. This board is equipped with a rich set of onboard features and interfaces for various Automotive DIY projects.

ElecronicsV3 has on board JLink Debugger for hassle free debugging the ARM Cortex M4 based Automotive Microcontroller S32K144. The Board also has On-board Bosch IMU sensor BNO055 for building telematics based automotive application. In complement to IMU sensor, board also has on-board CAN Transceiver IC for doing CAN Communication to build automotive projects effortlessly.

Buy Now
Buy Now
// User Manual and User Guide

To use ElecronicsV3

Getting_Started_Manual_ElecronicsV3
Autosar MCAL Layer Support
Elecronicsv3 has Autosar 4.4.0 MCAL layer standard based RTD present for all of its MCU peripherals. Giving users exposure to Autosaur Software stack.
On-Board IMU Sensor BNO55
ElecroncisV3 houses Inertial Mass Unit Sensor BNO055, through which telematic application of automotive for running Kalman filter based algorithms can be effortlessly deployed.
Matlab Model Based Designing Tool
ElecronicsV3 supports MATLAB Model Base Designing for building Complex Automotive Projects without writing any software piece of code.
On Board CAN2.0B Channel
ElecronicsV3 has single channel CAN terminal supporting standard, extended and CAN FD protocols. Enabling users to get hands-on practical with CAN communication according to automotive standard.
Eclipse IDE Based Programming
ElecronicsV3 also supports Industry standard IDE based on Eclipse for writing embedded software codes in C/CPP langauge. NXP Semiconductor provides S32 Design Studio IDE via which ElecronicsV3 can be used effortlessly.
On-Board Jlink Debugger
ElecronicsV3 has On-board Jlink debugger, which can be accessed via Type C cable. To start development with ElecroncisV3 with simple plug and play system.
// Intro Videos

Videos to get started with ElecronicsV3 Board

// More Intro Videos

Videos to explore for ElecronicsV3 Board

How to get started with ElecronicsV3
How to use ElecronicsV Automotive Development Boards || Hardware Required || Software Required
Click Here
Learn Autosar MCAL Technology
How tp get started with Autosar MCAL Layer using ElecronicsV Boards
Click Here
Learn MATLAB Model Base Designing Technology
How to get started with MATLAB Simulink for programming automotive MCU's via Model Base Designing ToolBox Using ElecronicsV Boards
Click Here
Learn Automotive Protocol Technology
Learn How to use Automotive communication protocols like CAN, LIN, by making Do-It-Yourself Projects using ElecronicsV Boards
Click Here
Learn Cryptography Technology
Learn how to get started with cybersecurity technology by understanding the concept of Hardware Security Modules using ElecronicsV Boards
Click Here
Learn Functional Safety Technology
How functional safety technology is implemented in automotive microcontrollers to safeguard automotive electronic devices deployed in vehicles
Click Here
Why to use ElcronicsV3 board?
Lorem ipsum dolor sit amet consectetur adipiscing elit dolor
Click Here
// Getting Started Guides

Resources to Get started

Getting Started
Dive into blogs on how to get started with ElecronicsV. Hardware setup, Eclipse IDE Software Installation and setup, familiarity with embedded tools to use S32K144 and some basic stuff to make your journey easy with NXP Semiconductors S32K1 Microcontrollers.
Click Here
S32K144 Peripherals
Dive into the world of S32K144 Automotive Peripheral. Peripheral overview, working, in depth explanation and how to use them
Click Here
Peripheral Drivers( Non Autosar)
Peripheral Drivers( Non Autosar) Dive into blogs to know how to use different Peripherals of S32K144 Microcontroller. Practical Handson, with explanation of SDK/RTD API's and S32K144 Pin mapping/connections, so as to demonstrating different features that are supported in S32K144 Microcontroller.
Click Here
Peripheral Drivers( Autosar(MCAL layer))
Autosar MCAL learning and tutorials using ElecronicsV boards
Click Here
Sensor-Modules-interfacing
Dive into blogs to know how to connect different sensors/modules with S32K144 Microcontroller by interfacing them using ElecronicsV development Board series
Click Here
DIY Projects
Recreating Arduino level project's using automotive frameworks and skill sets.
Click Here
// Getting Started Guides

Automotive Hardware Kit to procure

Time of flight Sensor
INR 500.00
Double BreadBoard
Embed the ElecronicsV3 Board into double breadboard to extend the Pins of it so as to connect external sensors/modules to it!!
INR 400.00
M2M-F2F-M2F Jumper wires
Use Long tangled Jumper Wires to connect logic analysers/CAN analysers and Oscilloscope probes with Pins of ElecronicsV3
INR 120.00
Single End Copper Wire
Use Breadboard compatible Copper Single End Connecting wires to connect multiple external Sensor/Module with ElecronicsV3 in a clean and less tangled manner
INR 120.00
Wire Cutter
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
INR 150.00
Logic Analyzer
A must have tool, to debug and analyze the Digital signals like UART, I2C, SPI, CAN, PWM and etc which are comming out of pins of ElecronicsV3 in a PC
INR 800.00
CAN Analyzer Tool
A Cost-effective way to analyse and debug the CAN signals coming out of ElecronicsV3 Pins
INR 7000.00
ST7789 LCD Screen
A Graphical Color Display to make engaging DIY projects to showcase. Based on SPI protocol supporting Driver learning via DMA and Interrupts.
INR 800.00
// Kew Features

Technical Hardware
Features of ElecronicsV3

S32K144 MCU in LFQP100 pin package

ElecronicsV3 is built on NXP Semiconductors Automotive Microcontroller S32K144.

Reset and Power Conffiguration

Slider for: Power Configuratio via UART Type C cable or Debugger Connector and Reset Configuration via Onboard reset button or Jlink Debugger

Detail Silk Screen

No Need to refer docs again and again, all Pins information and Labelling on the board.

Onboard RGB LED and 2 switches

RGB LED at PD15, PD16 and PD0 along with 2 tactile switches at PC12 and PC13

On-Board CAN transceiver IC TJA1051 via green screw Terminals

CAN2.0B complaint at CAN0 using PE5 and PE4 as CAN Tx-Rx pins, with CAN terminal Enable header

OnBoard IMU Sensor BMO055

1 Variable Potentiometer

Potentiometer at PC14 for playing ADC of S32K144 MCU

Onboard JLink Debugger

Plug and Play for Development

Breadboard Compatible Design, which exposes all of the pins of the Microcontroller and easily cpnnects external sensor/module's.

Pricing & Buy

Start With An Affordable

ElecronicsV3 is easy to use

Buy Now
Popular

ElecronicsV3

INR6.0K/piece
Automotive Microcontroller Board
  • Readily available
    • Cost Effective and easy to use
      • >>INR 12K/piece
Hobbyist- Tech Enthusiasts -Students
Pinout

ElecronicsV3 Pinout

ElecronicsV2 Pinout
Applications

Usecases of ElecronicsV3

Build Powertrain and Body control Specfic automotive applications
Click Here
Enable/Learn Cryptography Technology to in embedded world to make smart and secure automotive applications
Click Here
Build Small ECU nodes for Domain/Zonal Architecture.
Click Here
Learn/Explore Autosar MCAL Layer with ElecronicsV2
Click Here
Learn Automotive Peripherals with ElecronicsV2
Click Here
How to transition from Arduino/ESP to Industrial Microcontroller( S32K144 MCU)
How to start Embedded Software Development?
Click Here
// Embedded Tools and Frameworks

To use ElecronicsV3

NXP Semiconductors provide Embedded Software tools and gettobyte provides Embedded Hardware Tools to start your journey on S32K1 series of Microcontroller. From Integrated Development Environment (IDE) to Microcontroller Software packages for S32K1xx series of Microcontroller. As ElecronicsV2 is built on S32K144 Microcontroller, which belongs to S32K1xx series. So toolchains will be same for using ElecronicsV2 boards.

S32 Design studio

IDE to write programs for ElecronicsV2

S32 Non Autosar SDK

Non-Autosaur based Software stack of peripheral drivers, RTOS and middleware for using S32K144

S32 Autosar RTD

Autosaur 4.4 version based Software stack (MCAL Layer) for using S32K144 Peripherals
// Resources, Tutorial Content and Courses

To use ElecronicsV3

Getting Started with ElecronicsV Boards
DIY Project with ElecronicsV Boards
S32K144 MCU Peripherals
Sensor and Module Interfacing with ElecronicsV Boards
Autosar MCAL Peripheral Drivers for S32K144 MCU
Non-Autosar MCAL Peripheral Drivers for S32K144 MCU