Open ECU(STM32F103)
What is Open ECU(STM32F103)
Short Intro on Open ECU(STM32F103)
The ANCIT STM Trainer Board is an affordable embedded systems training board. This board utilizes the STM Bluepill module featuring the STM32F103C8T6 Arm Cortex M3 controller. It is equipped with a range of peripherals including I2C, ADC, CAN, GPIO, PWM, Timers, and UART. Additionally, the board includes an STLink V2 programmer/debugger and a FTDI USB-UART board for enhanced functionality.
Technical Hardware
Features of OpenECU
STM32F103 MCU
Powered with STMicroelectronics STM32F103 Microcontroller.
Pushbutton switch
Onboard switch button for triggering Input events
Debug Connector
STLinkV2 programmer and debugger connector
Detail SilkScreen
Well Detailed Silkscreen with Pins naming and header information's
On Board LED's and buzzer
2 On-Board LEDS and a buzzer for showing I/O applications.
On-Board CAN transceiver IC MCP255 via green screw Terminals
CAN2.0 B complaint port with CAN terminal Enable header
On Board I2C EEPROM 24C04
EEPROM memory IC 24C04 on I2C bus at I2C0 port.
Environment Sensor SHT-21
Environment sensor SHT-21 at I2C1 port
1 Variable Potentiometer
On Board Potentiometer to test and build various ADC applications
Expansion Board to connect USB-UART board
Connect FTDI USB-UART converter board directly with plug and play connector
Expansion Header for SPI Pins
SPI0 pins are exposed out via Male Header
OnBoard TestPoints
OnBoard Test Points for each Onboard Module connection
Start With An Affordable
OpenECU AUtomotive STM Trainer Kit
OpenECU Trainer Kit
- Readily available
OpenECU Pinout
Usecases of ElecronicsV2
Ingredients used for the
building Usecases
2Wheeler Head Unit
TOSUN TC1013 CAN Hardware for PC to CAN Network
2Wheeler Headlight
TENMA Programmable Power Supply
ANCIT Open ECU
Perfect Embedded Hardware Kit for
Automotive Startups/Corporates
Build automotive Proof of Conecpt
Struggling to find right kind of Embedded Hardware kits to build the proof of concept of your automotive products. Our Embedded Hardware Kits Would be helping partner for that.
Prototype/Reasearch based on Automotive chips
Building Automotive products require use of Semiconductor chips like that of NXP, Renesas, TI or Infineon. Explore Our Embedded Hardware kits which are based on Such Microcontroller Chips
Plug and Play system
Building/Developing Automotive Products, often require use of Hardware Kits which are easy to use and can be easily programmed with custom application, in addition to that based on Industrial Microcontrollers. Our Embedded Hardware Kits is solution to all listed needs.
To use OpenECU
NXP Semiconductors provide Embedded Software tools and gettobyte provides Embedded Hardware Tools to start your journey on S32K1 series of Microcontroller. From Integrated Development Environment (IDE) to Microcontroller Software packages for S32K1xx series of Microcontroller. As ElecronicsV2 is built on S32K144 Microcontroller, which belongs to S32K1xx series. So toolchains will be same for using ElecronicsV2 boards.
STM32 Design studio
IDE to write programs for ElecronicsV2
STLINKv2
Debuggers to flash the programs into ElecronicsV2 boards.
STM32HAL
Non-Autosaur based Software stack of peripheral drivers, RTOS and middleware for using S32K144
Automotive protocol analyzers
Autosaur 4.4 version based Software stack (MCAL Layer) for using S32K144 PeripheralsTo use OpenECU
To use OpenECU
Read About Our latest Kits
Our Reach
across India
Ancit Technologies
Automotive Consulting Company
Skill Lync
E-Learning Providers
Decible Labs
E-Learning providers
Capuf Embedded
Computer and Electronics Manufacturing