ElecronivsV2 Development Board
What is ElecronicsV2
Short Intro on ElecronicsV2
ElecronicsV2 is a versatile development board based on the NXP Semiconductor S32K144 MCU, designed for automotive enthusiasts and tech hobbyists. This board is equipped with a rich set of onboard features and interfaces for various Automotive DIY projects.
In an era, where the automotive sector is at its prime and everyone desires to make their
career advancements in the Automotive field, there is a need for a Microcontroller based
development board that is of automotive grade, with automotive capabilities to do direct
learning and gain knowledge on automotive/Embedded skill sets by making Industrial DIY projects And in such a world, ElecronicsV2
boards make a grand entrance.
ElecronicsV2 is obseleted now, users interested can refer ElecronicsV3 which has onBoard Jlink Debugger and IMU sensors for hassle-free enablement on automotive learning and projects.
Technical Hardware
Features of ElecronicsV2
S32K144 MCU in LFQP100 pin package
ElecronicsV2 is built on NXP Semiconductors Automotive Microcontroller S32K144.
On-Board UART for debugging via Type C USB cable
CP2102 Based USB to UART converter at LPUART1 port for logging runtime values and also for powering the board via Type C cable
Reset and Power Conffiguration
Slider for: Power Configuratio via UART Type C cable or Debugger Connector and Reset Configuration via Onboard reset button or Jlink Debugger
Onboard RGB LED and 2 switches
RGB LED at PD15, PD16 and PD0 along with 2 tactile switches at PC12 and PC13
On-Board CAN transceiver IC TJA1051 via green screw Terminals
CAN2.0B complaint at CAN0 using PE5 and PE4 as CAN Tx-Rx pins, with CAN terminal Enable header
Detail Silk Screen
No Need to refer docs again and again, all Pins information and Labelling on the board.
1 Variable Potentiometer
Potentiometer at PC14 for playing ADC of S32K144 MCU
Onboard JTAG-SWD 10-pin Debugger Connector
OnBoard 10 pin SWD connector for debigging and programming via external debugger like Jlink or PEMicro
Plug and Play for Development
Breadboard Compatible Design, which exposes all of the pins of the Microcontroller and easily cpnnects external sensor/module's.
Start With An Affordable
ElecronicsV2 is easy to use
ElecronicsV2
- Readily available
- Cost Effective and easy to use
- >>INR 12K/piece
ElecronicsV2 Pinout
Usecases of ElecronicsV2
Perfect Embedded Hardware Board for
Freshers and working professionals.
Learn Embedded Basics
Learn Basics of Microcontroller world using Industrial tools and framework like: Eclipse Based IDE, Jlink Debuggers, Microcontroller Software Packages (RTD, HAL) and Datasheet.
Learn Autosar Stack
Wanna learn and build skill sets for Autosaur Technology. ElecronicsV2 has support of Autosaur MCAL layer integrated with eclipse-based IDE..
Learn Device Driver Development
Learn how to use Microcontroller Peripherals like: GPIO, UART, I2C, SPI, Timers, Interrupts, DMA and etc with industrial Microcontroller Software Packages and stacks.
Learn Automotive Peripherals
Learn automotive peripherals like: CAN, LIN, FlexTimers, Hardware Security Modules on Industrial Microcontroller in cost effective ways.
Build Automotive projects.
Build Automotive projects in DIY form using Automotive sensors and frameworks.
Perfect Embedded Hardware Kit for
Automotive Startups/Corporates
Build automotive Proof of Conecpt
Struggling to find right kind of Embedded Hardware kits to build the proof of concept of your automotive products. Our Embedded Hardware Kits Would be helping partner for that.
Prototype/Reasearch based on Automotive chips
Building Automotive products require use of Semiconductor chips like that of NXP, Renesas, TI or Infineon. Explore Our Embedded Hardware kits which are based on Such Microcontroller Chips
Plug and Play system
Building/Developing Automotive Products, often require use of Hardware Kits which are easy to use and can be easily programmed with custom application, in addition to that based on Industrial Microcontrollers. Our Embedded Hardware Kits is solution to all listed needs.
To use ElecronicsV2
NXP Semiconductors provide Embedded Software tools and gettobyte provides Embedded Hardware Tools to start your journey on S32K1 series of Microcontroller. From Integrated Development Environment (IDE) to Microcontroller Software packages for S32K1xx series of Microcontroller. As ElecronicsV2 is built on S32K144 Microcontroller, which belongs to S32K1xx series. So toolchains will be same for using ElecronicsV2 boards.
S32 Design studio
IDE to write programs for ElecronicsV2
Jlink Debuggers
Debuggers to flash the programs into ElecronicsV2 boards.
S32 Non Autosar SDK
Non-Autosaur based Software stack of peripheral drivers, RTOS and middleware for using S32K144
S32 Autosar RTD
Autosaur 4.4 version based Software stack (MCAL Layer) for using S32K144 PeripheralsTo use ElecronicsV2
To use ElecronicsV2
Read About Our latest Kits
Our Reach
across India
Ancit Technologies
Automotive Consulting Company
Skill Lync
E-Learning Providers
Decible Labs
E-Learning providers
Capuf Embedded
Computer and Electronics Manufacturing